FiberLink 33713G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Fiber
The Fiberlink 3370 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over one single mode fiber. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.
Data signals are not required to operate the Fiberlink 3370 link and it can be used as a stand-alone 3G/HD/SD-SDI optical link. Previously serialized audio that is present SDI stream is left intact throughout the entire transmission process. The 3370 Series is immune to pathological signals over the entire budget link and operating temperature range.
Signals are equalized and re-clocked prior to fiber optic transmission and the 3371 receiver features a re-clocked SDI output.
The 3370 model operates with one single mode fiber.
Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more
Specifications3370 Transmitter: Fiber Optic OutputConnectorLC or STEmmiter TypeFP LaserOutput Power (nominal)-4.5 dBmSDI Re-clockingAt 270 Mbps, 1.485 Gbps & 2.97 GbpsWavelengths Used1310nm, 1490nm, 1550nm3370 Transmitter: Serial Video BNC InputData Rate Range270 Mbps to 2.97 GbpsEqualizationAutomatic up to 100m of Belden 1694A at 3.0 Gbps, 200m at 1.485 Gbps and 350m at 270 MbpsNumber of Inputs1Re-clocked Data Rates270 Mbps (SMPTE 259M),1.485 Gbps (SMPTE 292),2.97 Gbps (SMPTE 424M-2006)Return Loss>10dB up to 2.97 GbpsSupported StandardsSMPTE 259M, 292, 297-2006, 424M-20063371 Receiver: Fiber Optic InputConnectorLC or STMaximum Input Power0 dBmMinimum Input Sensitivity-17 dBm at 2.97 Gbps;-20 dBm at 1.485 Gbps-21 dBm at 270 Mbps;Wavelength1100 - 1620 nm3371 Receiver: Serial Video BNC OutputAlignment Jitter< 0.2 UI at 270 Mbps; < 0.2 UI at 1.485 Gbps; < 0.3 UI at 2.97 Gbps with color bar signalDC Offset0V ± 0.5VNumber of Outputs1Overshoot< 10% of amplitudeRe-clockingAt 270 Mbps, 1.485 Gbps & 2.97 GbpsRise/Fall Time< 135 ps at 2.97 Gbps per SMPTE 424M-2006;< 270 ps at 1.485 Gbps per SMPTE 292;0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259MSignal Level800mV ± 10%Timing Jitter< 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps; < 2.0 UI at 2.97 Gbps with color bar signalData SpecificationsControl FormatSwitch selectable RS-232, RS-422 & RS-485 (4 wire or 2 wire);Data BandwidthDC to 115 Kb/sec, max.Data Channels2 Channels, Bi-DirectionalProtocolsNRZ, NRZI, RZ, Manchester, Bi-phaseSignal ConnectorsRemovable terminal blockEthernet SpecificationsPort10/100 Base-T, RJ-45 connector, Auto-MDIXSpeed10 Mbps & 100 Mbps Ethernet, Switch SelectableGeneral SpecificationsBox Version Dimensions6.5 W x 1.15 H x 8 L (inches)165 W x 29 H x 203 L (mm)IndicatorsPower, Data Rate lock (3G, HD, SD), Alarm (card version only), RS-Data Channel 1, RS-Data Channel 2 & Ethernet LEDs on RJ-45 ConnectorMTBF36,000 HoursNumber of Fibers Required1 fiber for single mode fiber (Models 3370/3371)2 fibers for multimode fiber (Models 3372/3373)Operating Temperature-10 º C to +50 º CPower9-24 volts, AC or DC3370: 4.8 watts, 16.4 BTU/Hr3371: 4.65 watt s, 15.87 BTU/HrSlots in 6000A Card Cage2Weightapprox. 1 lb.; 0.45 kg
- 3G/HD/SD-SDI - This product supports SMPTE complaint 3G, HD and SD-SDI data rates.
- HDTV Resolutions to 1080p - This product supports HDTV resolutions of 480p, 720p and 1080p.
- 10/100 Ethernet - This product transmits and receives 10/100 Ethernet.
- RS-Type Data - This product transmits and receives RS-Type data.
- Box and Card - This product is available in a box or card configuration.
- Single Mode Fiber - This product comes in a version that supports Single Mode Fiber.