FiberLink 5200Bidirectional Audio, RS-Type Data, Ethernet and Contact Closure over one Fiber
The Fiberlink ® 5200 Series transmits bidirectional audio, RS-Type Data, 10/100 Base-T Ethernet and contact closure over one single mode or multimode fiber optic cable. All channels are independent and are simultaneously available offering unrivaled flexibility in one product: deploy it for audio and Ethernet today, redeploy it for audio, RS-Type Data, Ethernet and contact closure tomorrow!
All signals are bidirectional and travel to an astonishing distance of 30km when used with single mode fiber. Of course, you can use 50u and 62.5u multimode fiber as well to impressive distances of 1km and 0.8km respectively.
The Fiberlink 5200 Series is designed with CSI's proprietary optics providing stable, predictable and long-lasting performance.
Fiberlink 5200 supports the most common RS formats: RS-232, RS-422 & RS-485 4 wire or 2 wire.
The applications in which the Fiberlink 5200 Series can be used are endless, but it is ideal for broadcast or corporate studios, OB Vans, Point-of-View Cameras, Rental & Staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!
SpecificationsAudio SpecificationsAudio ConnectorScrew terminal blockAudio Noise Level-85 dBmBits per sample/ Sampling Rate24 bits, 52 kHzChannel Phase Differential±0.1 ºCrosstalk-100 dB (1kHz)Frequency Response+0/-0.5 dB, 20 Hz - 20 kHzInput Impedance600 Ohms terminated, >24K ohms unterminatedMaximum Audio Level+10 dBuNumber of Audio Channels2, balanced or unbalancedOutput Impedance50 Ohms nominalReceiver Output Gain+0 dB or +6 dB; switch selectableSignal-to-Noise Ratio (A-weighted)95 dB referenced full scale (balanced)SwitchesSelect input terminationBalanced or unbalanced input/output, selectable on a per-channel basisOutput gain boost +0 dB or +6 dBSystem GainUnity Gain, ±3%, Input: balanced 600 ohms, 50 ohms source impedanceOutput: balanced into 600 ohms, gain boost 0 dB.THDTHD 0.002%, 20Hz - 20 kHz, full scaleContact Closure SpecificationsContact Closure ConnectorsRemoveable terminal blockContact Closure InputDry contact or TTL level referenced to GNDContact Closure OutputIsolated reed relay contacts; 115 Volts AC; 50/60 Hz @ 0.2 A or 24 Volts DC @ 1 AData SpecificationsControl FormatSwitch selectable RS-232, RS-422 & RS-485 (4 wire or 2 wire);Data BandwidthDC to 115 Kb/sec, max.Data Channels1 Channel, Bi-DirectionalProtocolsNRZ, NRZI, RZ, Manchester, Bi-phaseSignal ConnectorsRemovable terminal blockEthernet SpecificationsPort10/100 Base-T, RJ-45 connector, Configured as MDISpeed10 Mbps & 100 Mbps Ethernet, Switch SelectableFiber Optic InputConnectorLC or STMaximum Input Power0 dBmMinimum Input Sensitivity-17 dBmWavelength1100 - 1620 nmFiber Optic OutputConnectorLC or STEmmiter TypeLaserOutput Power <em>(nominal) </em>-3.0 dBmWavelengths Used1310nm, 1490nm, 1550nmGeneral SpecificationsBox Version Dimensions6.5 W x 1.15 H x 8 L (inches)165 W x 29 H x 203 L (mm)IndicatorsPower, Audio activity, RS-Data Activity, Ethernet LEDs on RJ-45 Connector, Alarm (card version only)MTBF27,000 HoursNumber of Fibers:5200/5201: 1 FiberOperating Temperature-10 º C to +50 º CPower9-24 volts, AC or DC 5200: 7.5 watts, 25.6 BTU/Hr5201: 7.5 watt s, 25.6 BTU/HrSlots in 6000A Card Cage2Weightapporx. 1 lb.; 0.45 kg
- Single Mode Fiber - This product comes in a version that supports Single Mode Fiber.
- Multimode Fiber - This product comes in a version that supports Multimode Fiber.
- 10/100 Ethernet - This product transmits and receives 10/100 Ethernet.
- Bidirectional Audio - This product supports sending two pairs of independent audio, one in each direction.
- Bidirectional Contact Closure - This product supports bidirectional contact closure.
- RS-Type Data - This product transmits and receives RS-Type data.