Menu
Close
Call Artel Now

Quote Cart

Your Products(0 Items)
Request Quote
Product Selector
Clear All
Search Products
Call Artel Now


FiberLink OM16

16x16 Fiber Optic Matrix/Signal Router

Product Details

This product has been discontinued.

  • Specifications
  • Downloads
  • Specifications
    General Specifications
    Dimensions
    Without rackmount ears
    Inches:  16.75 W x 5.25 H x 14 D
    Millimeters: 425 W x 134 H x 356 DOccupies 3 RU
    Input Voltage Range
    95 - 250 volts AC,  47 -63 Hz
    MTBF
    OM32 – 32,000 hours
    OM16 – 38,000 hours
    Operating Temperature
    -10 C to +45 C
    Power
    OM32:   57 Watts, 179 BTU/Hr
    OM16: 39 Watts, 123 BTU/Hr
    Upgradeable
    Firmware upgradeable  by user.I/O ports are factory  upgradable only.
    Weight (Maximum)
    12 lbs, 5.46 kg
    Operating Features
    Preset Store, Recall, Review and Edit
    Up to 32 (OM16) or 64 (OM32)  presets may be stored and recalled  from the front panel, RS-232 or GUI.A preset consists of one or more I/O  paths and can be edited with or  without executing an I/O switch
    Remote Control
    Via RS-232 or Ethernet GUI
    Status Monitoring
    Front panel and GUI monitor of I/O  and laser statusRecall of current and preset pathsInternal Temperature through GUI
    USB Port
    A front panel USB port is used for  the external storage of presets and  matrix configuration. It’s also used  for upgrade of the product  firmware.
    Optical Inputs
    Connector
    LC or ST (must match output type)
    Data Rate
    50 Mbps - 3.2 Gbps
    Fiber Types Supported
    Multimode and Single Mode
    Maximum Input Sensitivity
    0 dBm
    Minimum Input Sensitivity
    270 Mbps – -21 dB1.485 Gbps – -20 dB2.97 Gbps – -17 dB
    Number to Order
    Independent of number of outputsOM32 - 1 to 32 inputsOM16 - 1 to 16 inputs
    Pathological Signal Support
    Yes, per SMPTE EG-34
    SMPTE 297-2006 Complaint
    Yes
    Wavelength
    1100 - 1620 nm
    Optical Outputs
    Connector
    LC or ST (must match input type)
    Data Rate
    50 Mbps - 3.2 Gbps
    Fiber Types Supported
    Multimode and Single Mode
    Number to Order
    Independent of number of inputsOM32 - 1 to 32 inputsOM16 - 1 to 16 inputs
    Output Power
    -3.5 dBm, +/- 0.5 dB
    Pathological Signal Support
    Yes, per SMPTE EG-34
    Re-clocked Data Rates
    All SMPTE 3G/HD/SD-SDI data  rates to 2.97 Gbps
    SMPTE 297-2006 Compliant
    Yes
    Wavelength
    1310 nm, nominal, FP laserOther wavelengths and output  power available via special order
  • Downloads