The Fiberlink 5200 Series transmits bidirectional audio, RS-Type Data, 10/100 Base-T Ethernet and contact closure over one single mode or multi-mode fiber optic cable. All channels are independent and are simultaneously available offering unrivaled flexibility in one product: deploy it for audio and Ethernet today, redeploy it for audio, RS-Type Data, Ethernet and contact closure tomorrow!

All signals are bidirectional and travel to an astonishing distance of 30km when used with single mode fiber. Of course, you can use 50u and 62.5u multi-mode fiber as well to impressive distances of 1km and 0.8km respectively.

The Fiberlink 5200 Series is designed optics providing stable, predictable and long-lasting performance.

Fiberlink 5200 supports the most common RS formats: RS-232, RS-422 & RS-485 4 wire or 2 wire.

The applications in which the Fiberlink 5200 Series can be used are endless, but it is ideal for broadcast or corporate studios, OB Vans, Point-of-View Cameras, Rental & Staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!

Audio Specifications

Audio Connector
Screw terminal block
Audio Noise Level
-85 dBm
Bits per sample/ Sampling Rate
24 bits, 52 kHz
Channel Phase Differential
 ±0.1 º
-100 dB (1kHz)
Frequency Response
+0/-0.5 dB, 20 Hz – 20 kHz
Input Impedance
600 Ohms terminated, >24K ohms unterminated
Maximum Audio Level
+10 dBu
Number of Audio Channels
2, balanced or unbalanced
Output Impedance
50 Ohms nominal
Receiver Output Gain
+0 dB or +6 dB; switch selectable
Signal-to-Noise Ratio (A-weighted)
95 dB referenced full scale (balanced)
Select input termination Balanced or unbalanced input/output, selectable on a per-channel basis Output gain boost +0 dB or +6 dB
System Gain
Unity Gain,  ±3%, Input: balanced 600 ohms, 50 ohms source impedance Output: balanced into 600 ohms, gain boost 0 dB.
THD 0.002%, 20Hz – 20 kHz, full scale

Contact Closure Specifications

Contact Closure Connectors
Removeable terminal block
Contact Closure Input
Dry contact or TTL level referenced to GND
Contact Closure Output
Isolated reed relay contacts; 115 Volts AC; 50/60 Hz @ 0.2 A or 24 Volts DC @ 1 A

Data Specifications

Control Format
Switch selectable RS-232, RS-422 & RS-485 (4 wire or 2 wire);
Data Bandwidth
DC to 115 Kb/sec, max.
Data Channels
1 Channel, Bi-Directional
NRZ, NRZI, RZ, Manchester, Bi-phase
Signal Connectors
Removable terminal block

Ethernet Specifications

10/100 Base-T, RJ-45 connector, Configured as MDI
10 Mbps & 100 Mbps Ethernet, Switch Selectable

Fiber Optic Input

Maximum Input Power
0 dBm
Minimum Input Sensitivity
-17 dBm
1100 – 1620 nm

Fiber Optic Output

Emmiter Type
Output Power <em>(nominal) </em>
-3.0 dBm
Wavelengths Used
1310nm, 1490nm, 1550nm

General Specifications

Box Version Dimensions
6.5 W x 1.15 H x 8 L (inches)165 W x 29 H x 203 L (mm)
Power, Audio activity, RS-Data Activity, Ethernet LEDs on RJ-45 Connector, Alarm (card version only)
27,000 Hours
Number of Fibers:
5200/5201: 1 Fiber
Operating Temperature
-10 º C to +50 º C
9-24 volts, AC or DC 5200: 7.5 watts, 25.6 BTU/Hr5201: 7.5 watt s, 25.6 BTU/Hr
Slots in 6000A Card Cage
apporx. 1 lb.; 0.45 kg
  • Single Mode Fiber – This product comes in a version that supports Single Mode Fiber.
  • Multimode Fiber – This product comes in a version that supports Multimode Fiber.
  • 10/100 Ethernet – This product transmits and receives 10/100 Ethernet.
  • Bidirectional Audio – This product supports sending two pairs of independent audio, one in each direction.
  • Bidirectional Contact Closure – This product supports bidirectional contact closure.
  • RS-Type Data – This product transmits and receives RS-Type data.

Fiberlink 5200 datasheet