Products

Description

The award winning DLC510 is a fully automatic L-Band satellite scanner with carrier ID, enabling downlinks from up to two satellites to be transported as ASI.

  • L-Band to ASI Demodulator
  • RF Monitoring
  • Carrier ID Monitoring (ETSI 103 129)
  • L-Band Satellite Scanner

The DLC510 is a dual port electrical L-band RF receiver enabling tuning and demodulation of DVB-S and DVB-S2 signals. The tuners support the full range of 950 to 2150 Megahertz band range and each tunes to a single transponder on C-band or KU-band signals. Support for LNB power and DiSEqC are included. The DLC510 is capable of demodulating two independent transponders supporting QPSK, 8PSK, 16APSK and 32APSK modulation. Operation is fully automatic requiring only downlink frequency and LNB power settings. Each ASI transport stream is output to rear panel BNC electrical connectors, the backplane, and a port selectable front panel HD-BNC.

Read how a global news network significantly reduced signal acquisition time using the DLC510’s satellite scanning capabilities.

This product has been discontinued

 

Environmental

Operating temperature
0 to 50°C
Ambient storage temperature
-40 to 80°C
Relative humidity (non-condensing)
10 to 95%
Power dissipation
<15 Watts

Physical

Dimensions
0.8” x 5” x 10.8”
1 slot in DigiLink chassis
Weight
<2 pounds, (1kg)

Input

L-Band RF
-65 to -25 dBm

Output

DVB-ASI

DVB-S Demodulation

Outer/Inner FEC
 Viterbi/Reed Solomon
QPSK
1/2, 2/3, 3/4, 5/6, 7/8    Up to 62 Mega baud

DVB-S2 Demodulation

Outer/Inner FEC
BCH/LDPC
QPSK
1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK
3/5, 2/3, 3/4, 5/6, 8/9, 9/10
16APSK
2/3, 3/4, 4/5, 5/6, 8/9, 9/10
32APSK
3/4, 4/5, 5/6, 8/9, 9/10
CCM – VCM/ACM
Multi-Stream / Single Stream
Short and long frame
Roll-off values
0.15, 0.20, 0.25, 0.35
Pilots Auto, ON or OFF
PL Scrambling Codes
0, 262141
From 0.25 to 65 Mega Baud
Up to 210 Mbps channel bit rate
Carrier ID
ETSI TS 103 129

Electrical Interface

Input
Rear (2) F-Type 75ohm
Output

Rear (2) BNC 75ohm

Front HD-BNC 75ohm

Other modules in chassis

Output return loss
>15 dB

Regulatory Conformance

Compliance
CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22

Functions:

  • L-Band to ASI Demodulator
  • RF Monitoring
  • Carrier ID Monitoring (ETSI 103 129)
  • L-Band Satellite Scanner
    • Selectable step size and scan range
    • Logs results for easy retrieval

Features:

  • Two independent 950-2150 MHz RF inputs
  • DiSEqC per input
  • Automatic MOD/COD detection
  • Advanced RF parameter and signal monitoring
  • DVB-S and DVB-S2 compliant
  • DVB-S2x roll off
  • ASI transport outputs
  • Supports transport formats and standards
  • DVB-S2: EN 302 307
  • DVB-S: EN 300 421
  • ASI Output: EN 500 83-9, ETSI 101 891
  • MPEG 2 Transport: ISO/IEC 13818-1
  • Carrier ID: ETSI  TS 103 129
  • Fully integrated into DigiLink platform enabling
    • ASI to IP Conversion
    • ASI Routing
  • Compact, flexible, and low power
    • Consumes a single function slot in DigiLink chassis
    • Configure via HTTP or SNMPv2
    • Consumes less than 15 Watts



  • CSA 60950
  • EN60950
  • EN55022 FCC Part 15 (Class A)
  • CISPR 22

Manual
Datasheet
Stencil
Quick Start Guide