Artel

en English
ar Arabiczh-CN Chinese (Simplified)nl Dutchen Englishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanish

Products

Artel
Contact
978-263-5775

Products

InfinityLink

ILC410

SD-SDI or ASI 2 Ch Bi-Directional IP Gateway

The InfinityLink ILC410 SD-SDI or ASI 2 Ch Bi-Directional IP Gateway expands the InfinityLink platform capabilities to include SMPTE standards-based video-over-IP transport for both DVB-ASI and SD-SDI formats.

SKU: ILC410 Categories: , , , , , , , , , , , , ,

Description

The ILC410 expands the InfinityLink video platform capabilities to include SMPTE standards-based video-over-IP transport for both DVB-ASI and SD-SDI formats.

Based on SMPTE 2022 standards for encapsulation and Forward Error Correction (FEC), the ILC410 enables SDI and ASI to be reliably transported across managed IP networks. The module is capable of transporting four channels (two in each direction) of DVB-ASI or SD-SDI over a gigabit Ethernet IP network connection. SDI video is transported in its entirety, including all ancillary data. ASI video streams from less than 20 Mb/s to over 200 Mb/s are supported and can be rate limited.

The ILC410 FEC enables the recovery of lost, errored, or delayed IP packets and can withstand burst outages in excess of 3 ms. Access to the IP network is through rear accessible, field replaceable SFPs either optically in WDM, CWDM , and DWDM wavelengths or electrically via an RJ-45 SFP.

 

Network Interface – Optical

Type
SFP
Optical connectors
LC
Format
1000Base-LX, 1000Base-ZX
Network Interface – Electrical

Type
SFP
Connector
RJ-45
Data rate
1000 Mb/s
Format
1000Base-T
Video Interface

Formats
SD-SDI (SMPTE 259M)
SDTI (SMPTE 305M)
DVB-ASI
Channels
2 input and 2 output
Electrical Interface

Input
(2) BNC 75 Ohm
Output
(2) BNC 75 Ohm
Monitor (front)
HD-BNC 75 Ohm
Return loss
>15 dB, 5-270 MHz
Cable equalization for Belden 1694A type cable
0 to 250 meters (270 Mb/s)
Environmental

Operating temperature
0 to 50°C
Ambient storage temperature
-40 to 80°C
Relative humidity (non-condensing)
10 to 95%
Power dissipation
12 Watts
Physical Dimensions
0.8” x 5” x 10.8” (1 slot in InfinityLink chassis)
Regulartory Conformance

Compliance

CSA 60950, EN60950, EN55022 FCC Part 15 (Class A), CISPR 22

Single-module transceiver for SD-SDI and DVB-ASI over Gig-E

  • Fully transparent carriage of SDI and SDTI
  • Includes all SDI and SDTI ancillary information
  • DVB-ASI stream rates from <20 Mb/s to >200 Mb/s
  • Supports 188-byte and 204-byte DVB-ASI packets
  • Provisionable limits on bandwidth for DVB-ASI

Four independent channels: two transmit, two receive

Unicast or multicast IP video streams

Standards-based encapsulation and Forward Error Correction

  • DVB-ASI
    • SMPTE 2022-2 Encapsulation
    • SMPTE 2022-1 FEC
  • SDI
    • SMPTE 2022-6 Encapsulation
    • SMPTE 2022-5 FEC
  • FEC recovers lost, errored, or delayed packets
  • Withstands burst outages in excess of 3 ms
  • Row and column FEC supported

Externally accessible SFP transceivers

  • Optical budget to 33 dB
  • WDM (1310 nm, 1550 nm)
  • CWDM ITU G.694.2 (Channels 27-61)
  • DWDM ITU G.694.1 (Channels 21-60)
  • Electrical to RJ-45 Ethernet

Front panel monitoring of active video signals

Remote management via InfinityLink Manager

  • No external software required
  • HTTP or SNMPv2
  • Monitor
  • Configure
  • Upgrade firmware


Manual
Datasheet
Stencil
Quick Start Guide

PRODUCTS
MARKETS
SUPPORT
ABOUT US
CONTACT US
SOLUTIONS
SERVICES
en English
ar Arabiczh-CN Chinese (Simplified)nl Dutchen Englishfr Frenchde Germanit Italianpt Portugueseru Russianes Spanish

© 2022 ARTEL VIDEO SYSTEMS | Headquarters: Westford, MA | Powered by Sales Renewal | Privacy Policy | Terms of Service